Single-walled carbon nanotubes: structure, properties, applications, and health & safety


Carbon atoms can bond together in various ways, resulting in a number of allotropic forms of carbon with different physical properties. The known allotropes include graphite, diamond, fullerenes, nanotubes and graphene. The last three are mostly artificial.

Their origin, morphology and method of production affect the properties that these carbon allotropes grant to materials when they are used as an additive, and this differs a lot from one form of carbon to another. Graphene and nanotubes have the best combination of properties and benefits.

Single-walled carbon nanotubes (SWCNTs), also called graphene nanotubes (GNTs)

Graphene

Multi-walled carbon nanotubes (MWCNTs)

Nanographite structures
(incl. few-layer “graphene”, graphene flakes (graphene nanoplatelets), graphene oxide (GO), reduced graphene oxide (RGO) and others)

Graphite structures (incl. carbon black)

Single-walled carbon nanotubes Graphene Multi-walled carbon nanotubes Nanographite structures Graphite structures

A graphene layer seamlessly rolled into a tube

A single sheet or monolayer of carbon atoms tightly bound in a hexagonal honeycomb lattice

A concentric arrangement of SWCNTs, i.e. multiple layers of graphene seamlessly rolled into a concentric tubular structure

Graphene flakes are small platelets of graphite; GO/RGOare few-layer nanoscale graphites, have oxygen groups or have undergone additional reduction

A large set of multiple graphene sheets

Industrial-scale production (hundreds of tonnes)

Not designed as an additive to materials (production in kgs)

Industrial-scale production (thousands of tonnes)

Industrial-scale production (thousands of tonnes)

Industrial-scale production (millions of tonnes)

These carbon-based additives, with the exception of graphene, are produced at a scale of hundreds or thousands of tonnes and are available for industrial applications.


Carbon nanotubes

Carbon nanotubes fundamentally fall into two classes: single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs). Despite the obvious commonality, SWCNTs and MWCNTs have significantly different physical properties from each other because of their structural differences.

The most important feature that distinguishes SWCNTs is that the wall of the nanotube consists of the only one graphene layer. In other words, single-walled carbon nanotubes can be described as graphene sheets seamlessly rolled up to form hollow cylinders. That is why they often referred to as graphene nanotubes (GNTs).

Unlike a single-walled nanotube, a multi-walled carbon nanotube can be viewed as a concentric arrangement of SWCNTs, i.e. consisting of multiple layers of graphene rolled up seamlessly into a tube shape.

differences between single-walled and multi-walled carbon nanotubes

These differences between single-walled and multi-walled carbon nanotubes result in substantially different properties and corresponding impacts on materials after their introduction.

elasticity of carbon nanotubes

Physical parameters of SWCNTs vs MWCNTs

Parameter

SWCNTs

MWCNTs

Key parameters

Typical diameter

1–2 nm*

7–100 nm

Typical length

Up to 1 mm**

Up to 1 mm

Aspect ratio

Up to 10 000

50–4000

Mechanical properties

Elastic modulus

1000–3000 GPa

300–1000 GPa

Tensile strength

50–100 GPa

10–50 GPa

Electronic structure properties

Thermal conductivity at 300K

3000–6000 W/(m·K)

2000–3000 W/(m·K)

Minimum working dosage as an anti-static additive

0.01%

0.5%

* Larger diameters are possible but could lead to an increased number of defects
** Longer lengths are possible but only at laboratory-scale


Synthesis of carbon nanotubes

There are three main methods of nanotube synthesis:

  • plasma arc discharge nanotube synthesis• plasma arc discharge: production of carbon nanotubes in an arc discharge plasma in a helium atmosphere.
  • laser evaporation synthesis of carbon nanotubes• laser evaporation (pulsed laser ablation): evaporation of a graphite target in a high-temperature reaction by the action of a pulsed laser.
  • chemical vapor deposition nanotube synthesis• chemical vapor deposition (CVD): catalytic (nickel, cobalt, iron or their combinations) deposition of carbon from hydrocarbons (methane, ethylene, acetylene)

Method

Arc discharge method

Chemical vapor deposition

Laser ablation

Process

Between two graphite rods a few millimeters apart, under high current (~100 A), carbon vaporises and forms a hot plasma

Heated up to 1000°C in an oven with/without a substrate, carbon-bearing gas such as methane decomposes on a catalyst into carbon nanotubes

Graphite under intense laser pulses evaporates and forms the carbon nanotubes

Typical yield

30–90%

50–100%

Up to 70%

SWCNTs

Short tubes with diameters of 0.6–1.4 nm

Long tubes/bundles (up to 40 micrometers) or bundles with individual diameters of 0.6–2 nm

Long bundles of tubes (5–20 micrometers), with individual diameters of 1– 2 nm

MWCNTs

Short tubes with inner diameter of 1–3 nm and outer diameter ~10 nm or more

Long tubes with external diameters of 10–240 nm

Typically, yield of MWCNTs is low. Characteristics vary significantly.

Production

Nanotubes tend to be short with random sizes; substantial purification is needed

Commercially the most developed method, easiest to scale up, good yield and quality control, high-purity SWCNTs

Not considered a commercially viable technique because it requires expensive lasers and it does not very good yield per power

Defects

Large quantities of impure SWCNTs and MWCNTs are generally produced, and the. SWCNTs have structural defects

MWCNTs are often riddled with defects compared with SWCNTs, for which the quality is better controlled

Laser ablation produces a small amount of CNTs, primarily SWCNTs, with good diameter control and which are quite pure and have few defects


CVD is the most developed method for commercial production of CNTs. 

chemical vapor deposition method for synthesizing single wall carbon nanotubes

This method also gives more flexibility in terms of diameter, length and morphology of nanotubes. Nevertheless, reproducibility often remains challenging.

Currently, OCSiAl is the leading manufacturer of SWCNT. The company produces high-quality single-walled carbon nanotubes at a scale of tens of tonnes annually, with plans to increase this to hundreds of tonnes.

standard CNT production process

Chirality and conductivity of SWCNTs

The geometry of nanotubes is determined by the chiral vector of the original hexagonal lattice. The type of self-assembly of the SWCNT (its chirality) influences its electrical conductive properties, making it conductive or semiconductive.

The state of twisting for an SWCNT can be described by the “n” and “m” chirality indexes, which reflect the vector direction for rolling the hexagonal lattice into a tube.

The reduced electrical resistance that nanotubes grant to materials depends on the dosage, their length, and the proportion of conductive CNTs among the overall amount of nanotubes. Doping with SWCNTs allows the fraction of conductive nanotubes to be increased by almost a factor of three.

single-walled carbon nanotubes chirality

The reduced electrical resistance that nanotubes grant to materials depends on the dosage, their length, and the proportion of conductive CNTs among the overall amount of nanotubes. Doping with SWCNTs allows the fraction of conductive (metallic) nanotubes to be increased by almost a factor of three.


Single-walled carbon nanotube applications

SWCNTs are proving their great potential for utilization as a multifunctional additive and for creating new products with previously unattainable properties. They allow improvement of various features in practically all known materials: to impart conductive and anti-static properties, and to increase strength, crack resistance, flexibility and adhesion, and many other parameters depending on the required application. Moreover, this is often achieved at SWCNT concentrations of tenths or hundredths of a percent, which generally makes it possible to retain the existing technologies for manufacturing the end products.

There are several approaches to classification of SWCNT applications. The most common are by the industry, material or type of industrial product. Classification by the type of industrial product can also be further classified depending on the potential volume of SWCNT consumption.

Composite materials and reinforced plastics, industrial coatings, car tires and rubber technical goods, structural materials, and materials for electrochemical power sources account for the most significant volume of SWCNT consumption. The next group of applications in terms of the volume of SWCNTs used includes adhesives and lubricants, anti-static plastics, transparent conductive films, and cables. Then there are a few niche applications that use limited quantities of single-walled carbon nanotubes.


SWCNT markets with the greatest potential

Composite materials with single-walled carbon nanotubes

SWCNTs are entering this market with a primary focus on applications in alternative energy and infrastructure (pipes, elements of building structures), and in automotive and aircraft structural materials. These industries require lightweight and strong materials with improved physical properties (blades of wind power generators, boat hulls, aircraft parts, vessels, etc.). The number of solutions to increase the strength of composite materials using SWCNTs is steadily increasing 2, 3.

Reinforced plastics with SWCNTs

These plastics are extensively used in many industries that have markets amounting to billions of dollars and that are experiencing considerable growth. The increasing use of SWCNTs in reinforced plastics is mainly due to the needs of the automotive industry, which is to reduce fuel inputs or battery load through reduction of weight of all car components, and the aerospace industry, which, in addition to weight reduction, needs materials that are able to resist extreme conditions and loads. All these challenges can be solved using single-walled carbon nanotubes4.

SWCNTs in industrial coatings

In this field, single-walled carbon nanotubes are used as a multifunctional additive for primers and paints designed for vehicle coatings (bodies of cars, aircraft, boat hulls, etc.), equipment (electrical and household appliances) and storage containers/vessels5, 6, 7 as well as for anti-static floors8. SWCNTs can be applied in more than half of the products in the vast market of industrial coatings.

Single-walled carbon nanotubes in car tires

The application of SWCNTs in tires allows significant improvement in their stiffness, tear resistance, fuel efficiency and grip9. This improvement is achieved at very low concentrations, with no additional changes required to the existing production technologies. SWCNTs can impart the required electrical conductivity to tires without any other conductive filler (e.g. without carbon black). The potential application of SWCNTs is estimated at 30% in the premium segment and at about 10% in the standard tires segment.

Electrochemical power sources with SWCNTs

The use of SWCNTs in electrochemical power sources has been shown to be beneficial in virtually 100% of the available technologies. The main segments in this market are rechargeable power sources, lithium-ion batteries for electric vehicles, as well as batteries for laptops and mobile phones, and alkaline cells. Their inclusion in battery electrodes makes it possible to significantly improve target parameters such as storage density and cyclability that have a direct impact on the service life of power sources10.

SWCNTs in rubber technical goods

Single-walled carbon nanotubes provide technological advantages to products based on a wide range of rubbers, silicones and thermoplastic elastomers. While improving the strength and elastic properties of rubber composites, SWCNTs also allow retaining and, in certain cases, enhancing other important properties such as Shore hardness, cohesive strength, dynamic strength, resistance to abrasion, reduction of hysteresis losses and retention of product colors11. SWCNTs have potential to be used in about one-third of rubber technical goods.

Structural materials containing single-walled carbon nanotubes

In materials such as bitumen12, asphalt13 and metal-based composite materials14, SWCNTs allow control of the structural features of the material while providing improved performance properties.


SWCNT markets with smaller potential

SWCNT technologies for environmental protection

In this industry, solutions with single-walled carbon nanotubes are being developed as hazardous gas and toxin detectors and in gas and liquid filtration systems. Once readymade market solutions become available, SWCNTs might be used in 3–5% of such products.

SWCNTs in biotechnology and medicine

Owing to their chemical compatibility with biomolecules (DNA and protein), single-walled carbon nanotubes can be used as components of biosensors and medical equipment. Tests of SWCNTs in implants show that they can be further used as coatings for catheters and neural implants. Solutions are also being developed for application in vivo, in particular for targeted delivery of substances encapsulated in SWCNTs16.

Electronics and microelectronics with SWCNTs

SWCNTs are strong but elastic and have excellent electronic properties. Therefore, they can be used in many applications in electronics, such as smart textiles, transistors, RFID chips, information storage devices, integrated circuits and CMOS batteries.

The above examples are not exhaustive in terms of the variety of SWCNT applications. Overall, adding SWCNTs can change 70% of the currently existing materials, which is equivalent to a market of about $3 trillion. Successful laboratory results and patents have been obtained in respect of many applications.

The launch of mass production of SWCNTs has made it possible to introduce laboratory results into industrial technologies and has enabled the manufacture of mass products. As the production volume of single-walled carbon nanotubes increases and their unit price decreases, their scope of application will expand even further.


Health & safety aspects of single-walled carbon nanotubes

In contrast to other carbon nanomaterials, single-walled carbon nanotubes have high flexibility, according to the German Federal Institute for Occupational Safety and Health (BAuA), which means that they have a number of completely different features in terms of health & safety, and environmental considerations.

Potential pulmonary risks

Assessments on specific SWCNTs have demonstrated that, due to their relatively large size, aerosol tests can not be carried out, allowing a conclusion that agglomerated SWCNTs can’t enter deep lung. SWCNTs show no rigidity, which is a result of their flexibility, and they have a propensity to reduce surface energy and a tendency to form bundles or agglomerates. The International Agency for Research on Cancer (IARC) has classified single-walled carbon nanotubes as a substance “unclassifiable as to carcinogenicity in humans”18.

Embedded into material matrix

With respect to consumer exposure, there is assumed to be no risk as consumers only contact single-walled carbon nanotubes when they are incorporated in composite materials, mainly polymer-based. Once SWCNTs are used as a reinforcing or conductive material in polymer composites, they are highly agglomerated and surrounded by polymers. Thus they no longer have any nanoparticle characteristics, and even in cases where composite material is ground, cut or otherwise mechanically degraded, pure SWCNTs are typically not released, but only as a part of higher aggregated, polymer-bound particles. In conclusion, exposure of consumers to SWCNTs is extremely limited and they are not considered to pose any hazard to consumers, either by inhalation or by dermal or oral exposure19.

Ecotoxicity

As pointed out by toxicologists20, unlike multi-walled carbon nanotubes and carbon fibers, single-walled carbon nanotubes are highly flexible and may thus generally have a lower potential to harm cell walls. A study on the effects of multi-walled carbon nanotubes on marine algae21 demonstrated both acute and chronic toxic effects of MWCNTs on marine algae21. A study performed with single-walled carbon nanotubes, found that there were no toxic effects after exposure of algae to SWCNTs22. It should be noted here that both studies were performed according to the same OECD test guideline 201.

Registration and other notifications

In 2016, the EU’s REACH Regulation (Registration, Evaluation, Authorisation and Restriction of Chemicals) registered single-walled carbon nanotubes as a new substance for the first time ever23.

In 2019, the US EPA (Environmental Protection Agency) published a SNUR in the Federal Register covering single-walled carbon nanotubes which authorizes unlimited nanotube sales up and down supply chain in the USA.


  1. L. Forro, et al. “Electronic and mechanical properties of carbon nanotubes”, in Science and Application of Nanotubes (Tomanek and Enbody, eds), Kluwer Academic/Plenum Publishers (New York, 2000).
  2. M. Ates, et al. Carbon nanotube-based nanocomposites and their applications. Journal of Adhesion Science and Technology, vol. 31(18), 2017, p. 1977–1997. https://www.tandfonline.com/doi/full/10.1080/01694243.2017.1295625
  3. DataMIntelligence. Global Carbon Nanotubes Market 2019–2026. September 2019. https://www.datamintelligence.com/research-report/carbon-nanotubes-market
  4. F.-L. Jin and S.-J. Park. A review of the preparation and properties of carbon nanotubes-reinforced polymer compositess. Carbon Letters, 2011, vol. 12(2), p. 57–69. http://koreascience.or.kr/article/JAKO201120956424265.page
  5. C. Simpson. Carbon Nanotube-Based Coatings. Adhesives & Sealants Industry, May 2013. https://www.adhesivesmag.com/articles/91920-carbon-nanotube-based-coatings
  6. V. Vijayan, et al. The weldability study of carbon nanotube based 2nd generation primer coated steel for automotive applications. Journal of Mechanical Science and Technology, vol. 31(9), 2017, p. 4405–4410. https://link.springer.com/article/10.1007/s12206-017-0840-7
  7. S. Park and M. Shon. Effects of multi-walled carbon nanotubes on corrosion protection of zinc rich epoxy resin coating. Journal of Industrial and Engineering Chemistry, vol. 21, 2015, p. 1258–1264.
  8. V. Kravchenko. Single-walled Carbon Nanotubes. Fundamental Improvement in ESD Flooring with 0.01% Additive. Coatings World, 2017. https://www.coatingsworld.com/issues/2017-03-O1/view_features/single-wall-carbon-nanotubes/
  9. Y. Lu, et al. From nano to giant? Designing carbon nanotubes for rubber reinforcement and their applications for high performance tires. Composites Science and Technology, vol. 137, 2016, p. 94–101.
  10. P. Sehrawat, et al. Carbon nanotubes in Li-ion batteries: A review. Materials Science and Engineering: B, vol. 213, 2016, p. 12–40.
  11. Research proves single wall carbon nanotubes capable of significantly improving elastomer properties. Nanowerk, 2015. https://www.nanowerk.com/nanotechnology-news/newsid=39408.php
  12. A. Akbari, et al. Bitumen modification using carbon nanotubes. World Applied Sciences Journal, vol. 18(4), 2012, p. 594–599. https://www.idosi.org/wasj/wasj18(4)2012.htm
  13. M. Faramarzi, et al. Carbon nanotubes-modified asphalt binder: preparation and characterization. International Journal of Pavement Research and Technology,  vol. 8(1), 2015, p. 29–38.
  14. C. Isaza Merino, et al. Metal matrix composites reinforced with carbon nanotubes by an alternative technique. Journal of Alloys and Compounds, vol. 707, 2017, p. 257–263.
  15. W. Kim, et al. Development of a carbon nanotube-based touchscreen capable of multi-touch and multi-force sensing. Sensors (Basel), vol. 15(11), 2015, p. 28732–28741. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4701304/
  16. G. Bisker, et al. A pharmacokinetic model of a tissue implantable insulin sensor. Advanced Healthcare Materials, vol. 4(1), 2015, p. 87–97. First published: 31 July 2014. (Related news article in Nature journal at https://www.nature.com/news/nanotube-implants-show-diagnostic-potential-1.18219)
  17. J. Luo, et al. Electrically conductive adhesives based on thermoplastic polyurethane filled with silver flakes and carbon nanotubes. Composites Science and Technology, vol. 129, 2016, p. 191–197.
  18. Carbon Nanotubes. IARC Monographs, vol. 111. https://monographs.iarc.who.int/wp-content/uploads/2018/06/mono111-01.pdf
  19. Tests show no nanotubes released during utilisation of nano-augmented materials. The Dr. Gupta-Verlag. https://www.gupta-verlag.com/news/technology/20190/tests-show-no-nanotubes-released-during-utilisation-of-nano-augmented-materials
  20. L. M. Sherman. Single-Wall Carbon Nanotubes Show No Ecotoxicity. Plastics Technology, 26 October 2018. https://www.ptonline.com/blog/post/single-wall-carbon-nanotubes-show-no-ecotoxicity)
  21. K. S. Pikula, et al. Effects of carbon and silicon nanotubes and carbon nanofibers on marine microalgae Heterosigma akashiwo. Environmental Research, vol. 166, 2018, p. 473–480. https://www.sciencedirect.com/science/article/abs/pii/S0013935118303049?via%3Dihub
  22. Turley, A. REACH registrant finds no aquatic toxicity for SWCNTs. Chemical Watch, 2 November 2018. https://chemicalwatch.com/71515/reach-registrant-finds-no-aquatic-toxicity-for-swcnts
  23. REACH Registration Completed for Single-Wall Carbon Nanotubes. PCI Magazine, 16 October 2016. https://www.pcimag.com/articles/102634-reach-registration-completed-for-single-wall-carbon-nanotubes